Weaving machine

Second-hand weaving machines | Used weaving looms

1 pc. weaving machine with dobby VAMATEX Leonardo
(Ref. No. 4128319). 3600 mm nominal width, year of construction 2002.
STÄUBLI dobby. Disc diameter 800 mm.
8 colours, 8 weft feeder, 2 warp beams, 1 winder, 20 shafts, lamellas and
wires available.
Dobby 2670 for 20 shafts.

1 pc. weaving machine with dobby VAMATEX LEONARDO SILVER
(Ref. No. 4128320). 3600 mm nominal width, year of construction 2004.
STÄUBLI dobby. Disc diameter 1000 mm.
8 colours, 8 weft feeder, 2 warp beams, 1 winder, 18 shafts, lamellas and
wires available.
Dobby 2670 B/2 for 20 shafts.
In addition: Upper beam device, type heavy fabric.

1 pc. weaving machine with dobby VAMATEX LEONARDO SILVER HS
(Ref. No. 4128321). 3600 mm nominal width, year of construction 2007.
FIMTESSILE dobby. Disc diameter 1000 mm.
8 colours, 8 weft feeder, 2 warp beams, 1 winder, 18 shafts, lamellas and
wires available.
Dobby SP 6 P for 20 shafts.
In addition: Upper beam device, type plisse fabric.

2 pcs. dobby weaving machines PICANOL OMNI PLUS (Ref. No. 4128322).
2200 mm nominal width, year of construction 2005.
Disc diameter 1000 mm.
4 colours, 4 weft feeder, 2 warp beams, 1 winder, 8 shafts, lamellas and
wires for each machine.
Dobby STÄUBLI 2871 for 12 shafts. 

4 pcs. tape weaving machines VARITEX V5Ni 2/110 (Ref. No. 4127936).
Year of construction 2006, used machines.
2 weaving heads per loom. Front reed width = max. 110 mm.
Number of installed heald frames: 10. Regulator = 3.5 - 36.7 picks/cm.
Repeat = 16 - 48, pattern chain. AC motor 1,1 kW.
Main voltage 3 x 400 V, 50 Hz, with neutral conductor. 
Accessories:
Rack for one cone per weft and binder thread.
Weaving kit: 500 healds, 500 droppers, 240 links with clips.
50 latch needles weaving system I.
2 x 25 latch needles weaving system II. 
Basic equipment:
Basic machine according to the before mentioned specification.
FKR take-off rollers with Vulkolan coating.
Weft feeder MUTRANS2. 
Each machine will be supplied with JAKOB MULLER take roller. 
The machines are in a very good condition. 

6 pcs. gripper weaving machines SULZER G 6200 (Ref. No. 4116830).
2400 mm working width, year of construction 2001, second-hand.
6 shafts, with dobby. Weft feeder LGL Sirio each 2 pieces.
Each machine comes with 1,5 pcs. warp beams.

1 pc. weaving machine SULZER G6200 (Ref. No. 4116831).
2400 mm working width, year of construction 2000, second-hand.
Excenter machine, 4 shafts. Weft feeder LGL Sirio 2 pieces.

4 pcs. gripper weaving looms SULZER G 6200 (Ref. No. 4116832).
2200 mm working width, year of construction 2001, second-hand.
6 shafts, with dobby. Weft feeder LGL Sirio each 2 pieces.
Each machine comes with 1,5 pcs. warp beams. 

2 pcs. hand weaving looms (Ref. No. 4127813).
One of the machines is fully operational. The other machine has been
used for taking spare parts. The inner width of the beam is 2170 mm,
the creel has a width of 1450 mm. 

10 pcs. weaving machines PICANOL OMNI F-2-P (Ref. No. 4127717)
2200 mm working width, year of construction 1998. 2 colours.
Excenter machines, max. 8 shafts possible.
Incl. 2 weft feeders for each machine.
Warp beam 1000 mm. Warp thread control KASUAGA. 

3 pcs. tape production machines BONAS VARITEKS (Ref. No. 4127612).
Year of construction 1978. 380 V, 3 phases, 50 Hz.
Motor 24 V, 4,2 Amp, motor 1,5 kW.
The machines were previously used for curtain tape production and
are in working condition. 

7 pcs. weaving machines PICANOL OMNI F-2-E (Ref. No. 4127251).
2200 mm nominal width, year of construction 1998.
Max. 6 shafts. Suitable for 2 colours.  

 

Jacquard weaving machines
Airjet and water jet weaving machines
Terry weaving machines
Carpet weaving machines

 

Back to top

 

© Elisabeth Aderhold-Marleaux Mail to