Calandering machine

Calenders | Foulards | Calendering machines second-hand | Padder | Embossers | Thermo bonding

1 pc. calender KLIEVERIK CFC 151-5500 (Ref. No. 7118819).
5200 mm working width, year of construction 2006, used.
Width of the heating roller 5500 mm.
Diameter of the heating roller 1350 mm.
Mechanical speed 0 - 30 m/min.
Max. 250°C temperature. 
The machine is dismantled and stored in dry ware house. Unfortunately
the calender has a sheet metal damage caused by a fork lift. 

1 pc. transfer calender LEMAIRE (Ref. No. 7118876).
1800 mm working width, year of construction ca. 1985, second-hand.
Drum diameter approx. 1000 mm.
The machine has not been used during the last 10 years.
The blanket is in good condition. With infeed system. 

1 pc. Latex embossing unit MATTHYS (Ref. No. 7148734).
2650 mm working width, year of construction 2015, used.
The embosser is suitable for gel foam latex.
The embossing unit has 2 rollers, one is smooth and the other one with a
special embossing pattern. Both rollers can be cooled. 
The machine has been used for approx. 100 hours only and is in good
condition.

1 pc. foulard SUCHY type BQ05/3400 (Ref. No. 7118614).
3200 mm working width, year of construction 2005, second-hand.
2 rollers. Vertical roller arrangement. Roller diameter 340 mm.
Max. line speed ca. 40 m/min. Main drive ca. 7,5 kW. 

1 pc. cooling calender SANTEX (Ref. No. 7118310).
2500 mm working width, year of construction 1990, second-hand.
With chromed rollers.

1 pc. foulard KÜSTERS  (Ref. No. 7118210)
2600 mm working width. 

1 pc. cooling calender SANTEX  (Ref. No. 7116811)
2800 mm working width, year of construction 1992.

1 pc. cooling calender SANTEX (Ref. No. 7116794).
2800 mm working width, year of construction 1991.
2 rollers each 280 mm diameter. 

1 pc. foulard with infeed system ERHARDT + LEIMER / KÜSTERS
(Ref. No. 7114248).
2800 mm working width, year of construction 1992 + 1995.
1. Infeed system with J-Box ERHARDT + LEIMER made from stainless steel
for separate feeding during roll change, construction year 1992.
2. Foulard KÜSTERS type 222.59.
Year of construction 1995, 2800 mm material width and with pressing
power up to 75 N/mm (!). Additionally with cleaning rakel CLOUTH
type CLOUTHFLEX, indirect steam heated heater.
Please consider the high pressing power of 75 N/mm! On your request
we would be pleased to send you an example calculation on the energy
saving and the line speed increase by using a 75 N/mm foulard compared
to a foulard with a linear pressure of only 50 N/mm.
The example calculation is based on 500 gr polyester needle felt.

1 pc. smoothing calender (Ref. No. 7113891).
2700 mm roller width, year of construction 1988, second-hand.
Generally reconditioned in 1999 (motor new, sealing heads new,
frequency converter new).
2 smoothing rollers, upper roll steel, lower roll rubber.
Drive: frequency controlled AC gear motor 1,5 kW.
Speed 2 - 22 m/min.
Slot adjustment possible 0 to 50 mm.

1 pc. foulard / padder KUSTERS (Ref. No. 7115489).
4200 - 4300 mm working width, year of construction approx. 1990.
The roll length from end to end is 5190 mm.
The roll working width is 4330 mm. This relates to the rubber covered
section.

1 pc. foulard SUCHY HBQ 02 2700 (Ref. No. 7115420).
2500 mm working width, year of construction 2003.
Speed approx. 100 m/min. Rollers horizontal.

1 pc. foulard KUESTERS (Ref. No. 7113892).
2700 or 2800 mm working width.

 

Thermobonding ovens

 

Back to top

 

Tornado Textilmaschinen GmbH Import-Export is used textile machinery dealer from Germany / Europe. We offer surplus nonwovens equipment and pre-owned textile machinery for sale. We buy and sell second-hand calenders and foulards, calendering machines, padder, embossing machines and thermobond calender. Your offers and enquiries will be appreciated.

 

© Elisabeth Aderhold-Marleaux Mail to